Difference between revisions of "Template:Tripwire WebUI Old"

(Step By Step Instructions)
(Step By Step Instructions)
Line 32: Line 32:
  
 
6. Next be sure to check any other options you may want such as Record & Record Delay, Snapshot, Relay out (1, 2, or both)alarm Delay and email.
 
6. Next be sure to check any other options you may want such as Record & Record Delay, Snapshot, Relay out (1, 2, or both)alarm Delay and email.
Note: For instructions on email setup see [[Email/Email Notifications Setup GMail|Email Setup]]. To record or save snapshots an SD card or recorder is required.
+
 
 +
[[Alarm_Config_Settings|> Configure Tripwire Response]]
 +
 
 +
Note: For instructions on email setup see [[Email/Email Notifications Setup GMail|Email Setup]].  
 +
 
 +
To record or save snapshots an SD card or recorder is required.
  
 
[[File:TripwireService6.PNG| 550px]]
 
[[File:TripwireService6.PNG| 550px]]

Revision as of 18:05, 29 October 2020

Video Instructions

Step By Step Instructions

1.Log into device using the Web Service.

TripwireService1.PNG


2.Select Setting -> Event -> IVS.

TripwireService2.PNG


3. Next to Rule Type click "+" in the new rule that shows below, define the Rule Name and in the drop down select "Tripwire" as the rule type

TripwireService3.PNG


4. Once the rule is created and named, use "Draw Rule" to place your Tripwire line and under the "Direction drop down define in which direction, if only one, crossing is prohibited. In this example crossing from B -> A is prohibited.

TripwireService4.PNG


5. Click "Setting" next to Period and a new window will appear. Here you can set the active time periods for the tripwire. By default the tripwire will be active 24/7. Each day can be edited individually or you can select multiple at once by checking the boxes and using the forms below to enter times. Up to 6 periods can be set for each day.

6. Next be sure to check any other options you may want such as Record & Record Delay, Snapshot, Relay out (1, 2, or both)alarm Delay and email.

> Configure Tripwire Response

Note: For instructions on email setup see Email Setup.

To record or save snapshots an SD card or recorder is required.

TripwireService6.PNG


7. When finished click Save.

TripwireService7.PNG