Difference between revisions of "Template:Tripwire WebUI New"

(Created page with " ===Video Instructions=== <embedvideo service="youtube">https://youtu.be/nQcnVb1Uq_I</embedvideo> ===Step By Step Instructions=== 1. Navigate in a web browser to the IP addre...")
 
(Step By Step Instructions)
 
(2 intermediate revisions by the same user not shown)
Line 8: Line 8:
 
[[File:IVSTripwireWebUINew1.png|800px]]
 
[[File:IVSTripwireWebUINew1.png|800px]]
  
2. From the Main Menu select "AI"
+
2. From the Main Menu select '''AI'''
  
 
[[File:IVSTripwireWebUINew2.png|800px]]
 
[[File:IVSTripwireWebUINew2.png|800px]]
  
3. Select "Parameters" on the left.
+
3. Select '''Parameters''' on the left.
<br>Then select "Smart Plan".
+
<br>Then select '''Smart Plan'''.
 
<br>Select the camera channel at the top.
 
<br>Select the camera channel at the top.
<br>Select and highlight "IVS" (You may need to de-select any other options).
+
<br>Select and highlight '''IVS''' (You may need to de-select any other options).
<br>Select "OK"
+
<br>Select '''OK'''
  
 
[[File:IVSTripwireWebUINew3.png|800px]]
 
[[File:IVSTripwireWebUINew3.png|800px]]
  
4. Select "IVS" on the left.
+
4. Select '''IVS''' on the left.
 
<br>Then choose the channel number at the top right and if the IVS will be done by the camera or by the recorder, by selecting either "AI by Camera" or "AI by Device" below the channel number.
 
<br>Then choose the channel number at the top right and if the IVS will be done by the camera or by the recorder, by selecting either "AI by Camera" or "AI by Device" below the channel number.
 
<br>Select the Plus button on the right to create a new IVS alarm rule
 
<br>Select the Plus button on the right to create a new IVS alarm rule
Line 26: Line 26:
 
[[File:IVSTripwireWebUINew4.png|800px]]
 
[[File:IVSTripwireWebUINew4.png|800px]]
  
5. Double-click on the option under "Type" for the new rule you created and set it to "Tripwire".
+
5. Double-click on the option under '''Type''' for the new rule you created and set it to '''Tripwire'''.
<br>Give this rule a name by double-clicking the text box under "Name" and typing in a name.
+
<br>Give this rule a name by double-clicking the text box under '''Name''' and typing in a name.
<br>Select the "Draw Rule" button on the left.
+
<br>Select the '''Draw Rule''' button on the left.
 
<br>Left click anywhere on the camera view to start the tripwire line.
 
<br>Left click anywhere on the camera view to start the tripwire line.
 
<br>Left click anywhere else on the camera view to complete the segment of the line. Continue moving your mouse and left clicking to continue making multiple segments of the tripwire line.
 
<br>Left click anywhere else on the camera view to complete the segment of the line. Continue moving your mouse and left clicking to continue making multiple segments of the tripwire line.
Line 35: Line 35:
 
[[File:IVSTripwireWebUINew5.png|800px]]
 
[[File:IVSTripwireWebUINew5.png|800px]]
  
6. Select "Draw Target".
+
6. Select '''Draw Target'''.
<br>Then select "Max Size" and adjust the size of the box on the camera view to the relative maximum size for a target that can trigger the tripwire.
+
<br>Then select '''Max Size''' and adjust the size of the box on the camera view to the relative maximum size for a target that can trigger the tripwire.
<br>Select "Min Size" and adjust the size of the box on the camera view to the relative minimum size for a target that can trigger the tripwire
+
<br>Select '''Min Size''' and adjust the size of the box on the camera view to the relative minimum size for a target that can trigger the tripwire
  
 
[[File:IVSTripwireWebUINew6.png|800px]]
 
[[File:IVSTripwireWebUINew6.png|800px]]
  
7. Select the drop-down menu next to "Direction" to choose if the IVS alarm is triggered in both directions ("Both") or just one direction ("A To B" or "B To A").
+
7. Select the drop-down menu next to '''Direction''' to choose if the IVS alarm is triggered in both directions ("Both") or just one direction ("A To B" or "B To A").
<br>Adjust the settings below "Direction" to configure what happens when the tripwire alarm is triggered:
+
<br>Adjust the settings below '''Direction''' to configure what happens when the tripwire alarm is triggered:
<br>'''Period''' - Sets the time and days of the week this alarm can be triggered
+
 
<br>'''Post-Record''' - Sets the amount of seconds that are recorded after the alarm event is done being triggered, if "Record Channel" is enabled
+
[[Alarm_Config_Settings|> Configure Tripwire Response]]
<br>'''Alarm Out''' - Sets alarm outputs that will be activate when this alarm is triggered
+
 
<br>'''Record Channel''' - Sets which channels are recorded when the alarm is triggered
+
<br><br>Select '''OK''' to save the settings
<br>'''Tour''' - Enables a tour when the alarm is triggered
 
<br>'''PTZ Activation''' - Sets the behavior of a PTZ camera connected to the same recorder when the alarm is triggered
 
<br><br>Select "More Settings for the following options:
 
<br>'''Buzzer''' - Makes the recorder emit an audible beeping noise when the alarm is triggered
 
<br>'''Log''' - Records the event information in the system log when the alarm is triggerd
 
<br>'''Send Email''' - Sends an email, via the settings set in the Email section of the Network settings on the recorder, when the alarm is triggered
 
<br><br>Select "OK" to save the settings
 
  
 
[[File:IVSTripwireWebUINew7.png|800px]]
 
[[File:IVSTripwireWebUINew7.png|800px]]
 
[[File:IVSTripwireWebUINew8.png|400px]]
 
[[File:IVSTripwireWebUINew8.png|400px]]
  
8. Select "OK" to save the Tripwire IVS alarm settings
+
8. Select '''OK''' to save the Tripwire IVS alarm settings
  
 
[[File:IVSTripwireWebUINew9.png|800px]]
 
[[File:IVSTripwireWebUINew9.png|800px]]

Latest revision as of 18:09, 29 October 2020

Video Instructions

Step By Step Instructions

1. Navigate in a web browser to the IP address of the camera or recorder and log into the device

IVSTripwireWebUINew1.png

2. From the Main Menu select AI

IVSTripwireWebUINew2.png

3. Select Parameters on the left.
Then select Smart Plan.
Select the camera channel at the top.
Select and highlight IVS (You may need to de-select any other options).
Select OK

IVSTripwireWebUINew3.png

4. Select IVS on the left.
Then choose the channel number at the top right and if the IVS will be done by the camera or by the recorder, by selecting either "AI by Camera" or "AI by Device" below the channel number.
Select the Plus button on the right to create a new IVS alarm rule

IVSTripwireWebUINew4.png

5. Double-click on the option under Type for the new rule you created and set it to Tripwire.
Give this rule a name by double-clicking the text box under Name and typing in a name.
Select the Draw Rule button on the left.
Left click anywhere on the camera view to start the tripwire line.
Left click anywhere else on the camera view to complete the segment of the line. Continue moving your mouse and left clicking to continue making multiple segments of the tripwire line.
When done drawing the line segments, right click to finish the line.

IVSTripwireWebUINew5.png

6. Select Draw Target.
Then select Max Size and adjust the size of the box on the camera view to the relative maximum size for a target that can trigger the tripwire.
Select Min Size and adjust the size of the box on the camera view to the relative minimum size for a target that can trigger the tripwire

IVSTripwireWebUINew6.png

7. Select the drop-down menu next to Direction to choose if the IVS alarm is triggered in both directions ("Both") or just one direction ("A To B" or "B To A").
Adjust the settings below Direction to configure what happens when the tripwire alarm is triggered:

> Configure Tripwire Response



Select OK to save the settings

IVSTripwireWebUINew7.png IVSTripwireWebUINew8.png

8. Select OK to save the Tripwire IVS alarm settings

IVSTripwireWebUINew9.png