Template:Product Point to Point

Wireless Point to Point

Models	Image	Description	Info	Specifications	Manual	EOL
DHI-PFWB5-10n		Station	Integrated 5 GHz (2 x 2) MIMO Radio Recommended for up to 3.11 miles (5 km) PTP/PTMP Wireless Connection (as a station in PTMP link) Frequency 5.150 – 5.850 GHz (FCC 5.150 to 5.250 and 5.725 to 5.850 GHz)			No
DHI-PFWB5-90n		Access Point	Integrated 5 GHz (2 x 2) MIMO Radio Recommended as a Base Station for 3.11 miles (5 km) PTMP Wireless Connection Frequency 5.150 – 5.850 GHz (FCC 5.150 to 5.250 and 5.725 to 5.850 GHz)			No

Models	Image	Description	Specifications	Manual	EOL
DH-PFM880		Wireless Base Station			Yes
DH-PFM881		Wireless Video Transmission Device			Yes

NOTE

• DO NOT MIX GENERATION 1 and GENERATION 2 DEVICES!
• Access point broadcasts the SSID, and the base station(s) connect to the access point.

Networking Mode

Point to Point
Point to Multipoint

Information

• 192.168.1.36 is default IP
• Default User Name = admin
• Default Password = admin
• DHI-PFWB5-90n, Access Point, long skinny unit, Home Base
• DHI-PFWB5-10n, Station, square unit, Satellite

Operating Modes

802.11n:

• Access Point (autoWDS),
• Access Point (TDMA 2)
• Access Point (TDMA 3)
• Station (WDS/TDMA 2/TDMA 3)
• Station (ARPNAT)

802.11ac:

• Access Point (autoWDS)
• Access Point (TDMA3)
• Station (WDS/TDMA 3)

How to reset the DH-PFWB5-10n and DH-PFWB5-90n

• Make sure the unit is connected to the POE unit that is included in the package.

• Press the reset button for 15 seconds. You will see the LED on the side of the device flash.

What is in the box - PFWB5-1-90N

Step by Step Instruction for Wireless Transmission Device DH-PFWB5-90n as Access Point

• It is best to setup these devices on a bench before installing them.
• Power on and Configure one device at a time, they all have the same default IP address.
• Always use the included PoE injector on all configurations.

1. Set your PC IP address in the range of 192.168.1.X
2. Connect your PC to the DH-PFWB5-90n via the LAN port on the PoE injector using a patch cable.
3. Ping the IP address of the DH-PFWB5-90n (192.168.1.36) to make sure it is online.
4. Login to the device using IE or Chrome browser. The default username is "admin" and the default password is "admin". (We recommend changing this as soon as possible.)

5. Check the box for "I have read and agree". Choose your Country. Then choose the scenario (either Point to Point if it's just 2 devices or Point to Multipoint if it is more than 2 devices). Click "Change" to save your changes.
6. You will then be brought to the main menu of the device.

7. Click on the Gear icon at the top, and go to Wireless Configuration on the left.
8. Make sure the "Enable Radio" button is enabled.
9. Select Operation Mode "Access Point (WDS/TDMA 2/TDMA 3)"
10. Click on the SSID name at the bottom. Then setup change the SSID name, Security type, and enter the password for the access point.

11. Go to Network Configuration on the left and set the Mode to "Bridge"
12. Assigned a static IP, DNS and Subnet mask.

13. Go back to the Information Screen by selecting the "i" icon at the top.
14. Here you can see that the device's online status, its SSID, and its IP.

The device is now configured as an Access Point.

Step by Step Instruction for Wireless Transmission Device DH-PFWB5-10n

• It is best to setup these devices on a bench before installing them.
• Power on and Configure one device at a time, they all have the same default IP address.
• Always use the included POE injector on all configurations.
• What is in the BOX - DH-PFWB5-10n.

• 1. Give your PC a IP address of 192.168.1.200
• 2. Connect to the DH-PFWB5-10n to your PC using a patch cable.
• 3. ping the IP address of the DH-PFWB5-10n (192.168.1.36) to make sure it is alive.
• 4. Using IE or Chrome type the IP address on a browser.
• 5. Login screen.

• 6 Main Menu

• Setup, Wireless Configuration.
• 7. Enable the radio button.
• 8. Operation Mode "Station (WDS/TDMA 2/TDMA 3)"
• 9. Wireless Station Settings, SSID and Security.

• 10. Network Configuration, Bridge mode
• 11. Assigned a static IP, DNS and Subnet mask.

• 12. Information Screen.
• 13. Here you can see that the device is online, SSID, IP.

• Congratulation your device is online.

Instructions

• How to Reset Dahua V-Radio Wireless Bridge Using Reset Tool