SmartPSS/PC NVR Setup
Revision as of 19:38, 20 October 2015 by JP (talk | contribs) (Created page with "===How to Configure SmartPSS to Record IP Camera Feed=== Note: Please be sure you have completed the, "Install SmartPSS Guide" before proceeding with these...")
How to Configure SmartPSS to Record IP Camera Feed
Note: Please be sure you have completed the, "Install SmartPSS Guide" before proceeding with these instructions.
1. Launch SmartPSS and click, "PC-NVR"
2. Click the power button on the right to turn PC-NVR on.
3. Click the plus sign.
4. Click the device you wish to setup to record.
5. Click on the check box below the image.
6. Click, "Import"
7. Click, "Disk Management" on the left hand side. In this section, you can allocate a specific portion of your computer's hard drive to be used for recording video directly from your device.
8. Input the amount of space that you wish to allocate in gigabytes, and click "Allocate" After a brief moment PC-NVR will restart.
9. Click, "Record Plan" on the left hand side.
