Difference between revisions of "Template:Product Point to Point"
(→Step by Step Instructions for Wireless Transmission Devices) |
(→Step by Step Instructions for Wireless Transmission Devices) |
||
Line 94: | Line 94: | ||
== Step by Step Instructions for Wireless Transmission Devices == | == Step by Step Instructions for Wireless Transmission Devices == | ||
* It is best to setup these device on a bench before installing them. | * It is best to setup these device on a bench before installing them. | ||
− | * Power on and Configure one device at a time, they all the same '''default IP address'''. | + | * Power on and Configure one device at a time, they all have the same '''default IP address'''. |
* Always use the included POE injector on all configurations. | * Always use the included POE injector on all configurations. | ||
* What is in the BOX - DH-PFWB5-10ac. | * What is in the BOX - DH-PFWB5-10ac. |
Revision as of 21:16, 19 November 2019
Contents
Product
NOTE
DO NOT MIX GENERATION 1 and GENERATION 2 DEVICES!
Networking Mode
Point to Point | 400px |
Point to Multipoint | 400px |
Information
- 192.168.1.36 is default IP
- Default User Name = admin
- Default Password = admin
- DHI-PFWB5-10n-Station, square unit, satellite
- DHI-PFWB5-90n-Access Point, long skinny unit, Home Base
Operating Modes
802.11n:
- Access Point (autoWDS),
- Access Point (TDMA 2)
- Access Point (TDMA 3)
- Station (WDS/TDMA 2/TDMA 3)
- Station (ARPNAT)
802.11ac:
- Access Point (autoWDS)
- Access Point (TDMA3)
- Station (WDS/TDMA 3)
Step by Step Instructions for Wireless Transmission Devices
- It is best to setup these device on a bench before installing them.
- Power on and Configure one device at a time, they all have the same default IP address.
- Always use the included POE injector on all configurations.
- What is in the BOX - DH-PFWB5-10ac.
1. Connect to the DH-PFWB5-10ac