USA/NVR/Ultra/DHI NVR6A16DR 128 4K

Revision as of 17:50, 30 June 2017 by Kevin (talk | contribs)

DHI-NVR6A16DR-128-4K

float

DHI-NVR6A16DR-128-4K NVR6A16DR128.jpg
Series: Ultra
Compression: H.264/MJPEG
Channels: 128
Input Bandwidth: 384Mbps
Record Bandwidth: 384Mbps
Max Decode: 4ch@4K/16ch@1080P
Video Output: 2 HDMI, VGA
HDD: 16x6TB
RAID: 0/1/5/6/10/50/60
eSATA: 1
Mini SAS: 1
Audio In: 1
Audio Out: 1
Alarm In: 16
Alarm Out: 8
Network: 4 Gigabit Ports, 2Gigabit Fiber Optical Interfaces
POE: 0
USB: 2 USB 3.0, 2 USB 2.0
Power: AC100V~240V, 50~60Hz,
Redundant<40W(No HDD)
IVS: Yes
Fisheye Dewarp: Yes
POS: Yes
Firmware: URL

Features

  • Max 128 channel IP cameras connection
  • Max 384Mbps incoming bandwidth
  • Up to 12Mp resolution preview& playback
  • 1 VGA+2 HDMI
  • Support 16 hot-swap HDDs
  • Support RAID 0/1/5/6/10/50/60
  • Support N+M hot standby
  • Support iSCSI & Mini SAS to expand storage space
  • Compatible with Dahua SDK and seamless integrated to other platforms
  • Support Multi-brand network cameras: Dahua, Arecont Vision, AXIS, Bosch, Brickcom, Canon, CP Plus, Dynacolor, Honeywell, Panasonic, Pelco, Samsung, Sanyo, Sony, Videotec, Vivotek and etc.
  • ONVIF Version 2.4 conformance
  • Redundant power supply module adopted (DH-NVR616R-128 &DH-NVR616DR-128)
  • Front LCD display (DH-NVR616D-128 & DH-NVR616DR-128)

Compression

Firmware

You can update your device with the NVR Firmware Toolkit.

Firmware Update Instructions

Firmware Update Download

1. Apply this update to your system first: Click Here To Download

2. Apply this update to your system second: Click Here To Download


Firmware Changelog

  • Build Date: 4/9/2016
  • English, Spanish, Frech optional, Default English, NTSC

Intelligent Features

Front Panel

NVR70/70-R Series

NVR7070RFrontPanel.png

SN

Name

Icon

Function

1

Power button

Press it once to turn on the device.

Press it for a long time to turn off the device (Usually we do not recommend).

Press power button for a long time or pull out the power cable may result in device auto restart.

2

System HDD Indicator light  

The blue light flashes when system is reading or writing the system HDD.

In the system HDD, there are device important configuration file, factory default configuration file, device initial boot up data.

3

Alarm indicator light  

The alarm indicator light  becomes on once an alarm occurred. It becomes on via the software detection. The alarm includes local alarm, no disk and etc.

4

Network indicator light

The network indicator light  is blue and it flashes when you connect the device to the network.

5

USB2.0 port

Connect to USB2.0 storage device, mouse, USB burner and etc.

6

16 HDD slot

-

/

After you remove the front panel, you can see there are 16 HDDs. From the left to the right and from the top to the bottom, it ranges from 1~4, 5~8, 6~12, 13~16.

NVR7070RFrontPanel2.png

You can see there are two indicator lights on the HDD bracket.

  • The power indicator light is at the top. The light is yellow after you connected the device to the power.
  • The read-write indicator light is at the bottom. The blue light flashes when system is reading or writing the data.

Back Panel

NVR70-R Series

The NVR70-R series rear panel is shown as below.

NVR70RBackPanel.png

Port Name

Function

Power switch

/

Power on-off button

Power input port

/

Input AC 100~240V.

MIC IN

Audio input port

Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup.

MIC OUT

Audio output port

Audio output port. It is to output the analog audio signal to the devices such as the sound box.

  • Bidirectional talk output.
  • Audio output on 1-window video monitor.
  • Audio output on 1-window video playback.

VIEDEO  OUT

Video output port

CVBS output

1~16

Alarm input port 1~16

  • There are four groups. The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close).
  • When your alarm input device is using external power, please make sure the device and the NVR have the same ground.

GND

Alarm input ground port.

NO1~NO5

Alarm output port 1~5

  • 5 groups of alarm output ports. (Group 1:port NO1~C1,Group 2:port NO2~C2,Group 3:port NO3~C3, Group 4:port NO4~C4, Group 5: port NO5, C5, NC5).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device.
  • NO: Normal open alarm output port.
  • C: Alarm output public end.
  • NC: Normal close alarm output port.

C1~C5

NC5

A

RS-485 communication port

RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.

B

RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.

CTRL 12V

/

Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector.

+12V

/

+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A.

Network port

10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable.

eSATA

eSATA port

External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD.

USB2.0 port

USB2.0 port. Connect to mouse, USB storage device, USB burner and etc.

RS-232

RS232 debug COM.

It is for general COM debug to configure IP address or transfer transparent COM data.

HDMI

High Definition Media Interface

High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3. The two HDMI ports to output video from different video sources.

VGA

VGA video output port

VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.

Specifications

Model DH-NVR6A16-128-4K DH-NVR6A16D-128-4K DH-NVR6A16R-128-4K DHI-NVR6A16DR-128-4K
System
Main Processor Intel Processors
Operating System LINUX
Video & Audio
IP Camera Input 128 channel
Two-way Talk

1channel Input, 1channel Output, RCA

Display

Interface 2 HDMI (up to 3840x2160), 1 VGA
Resolution 3840×2160, 1920×1080, 1280×1024, 1280×720, 1024×768
Multi-screen Display The 1st screen: 1/4/8/9/16/25/36
The 2nd screen: 1/4/8/9/16
OSD Camera title, Time, Video loss, Camera lock, Motion detection, Recording
Recording
Compression H.264/MJPEG
Resolution 12Mp, 8Mp, 6Mp, 5Mp, 3Mp, 1080P, 1.3Mp, 720P & etc.
Record Rate

256Mbps

Bit Rate 1~ 20Mbps

Record Mode

Manual, Schedule(Regular(Continuous), MD(Video detection: Motion detection, Camera blank, Video loss), Alarm), Stop

Record Interval 1~120 min (default: 60 min), Pre-record: 1~30 sec, Post-record: 10~300 sec
Video Detection & Alarm
Trigger Events Recording, PTZ, Tour, Alarm out, Video Push, Email, FTP, Snapshot, Buzzer & Screen tips

Video Detection

Motion Detection, MD Zones: 396(22×18), Video Loss & Camera Blank

Alarm Input 16ch, low level effective, green terminal interface
Relay Output 8ch, Relay contact(1A@24VDC), NO/NC programmable, green terminal interface
Playback & Backup
Playback 128Mbps in Raid 5 mode
64Mbps in single HDD mode
Search Mode Time/Date, Alarm, MD & Exact search (accurate to second)
Playback Function Play, Pause, Stop, Rewind, Fast play, Slow play, Next file, Previous file, Next camera, Previous camera, Full screen, Repeat, Shuffle, Backup selection, Digital zoom
Backup Mode USB Device/Network/Internal SATA burner/eSATA Device
Network
Interface 4 RJ-45 ports (10/100/1000Mbps)
Ethernet Port 4 Ethernet ports joint working or 4 independent 1000Mbps Ethernet ports
Optical Fiber Interface 2 Giga Optical fiber interface
Network Function HTTP, TCP/IP, IPv4/IPv6, UPnP, RTSP, UDP, SMTP, NTP, DHCP, DNS, IP Filter, PPPoE, DDNS, FTP, Alarm Server, IP Search(Support Dahua IP camera, DVR, NVS and etc.)
Max. User Access 128 users

Smart Phone

iPhone, iPad, Android

Storage
Internal HDD 16 SATA III ports, up to 96TB
HDD Mode Single, Raid 0/1/5/6/10/50/60 (Support global HDD hot-spare)
Auxiliary Interface
Front cover Support hot swap, 7" inch HD LCD (1920x1080/1280x1024/1024x768) (Model –D&DR)
USB 4 USB ports(3 USB2.0, 1 USB3.0)
eSATA 1 eSATA port
SAS 1 Mini SAS port, for storage expansion
RS232 1 port, for PC communication& keyboard
RS485 1 port, For PTZ control
General
Power Supply AC100V~240V, 50~60Hz AC100V~240V, 50~60Hz ,
Redundant
Power Consumption  
Working Environment -10°C~+55°C/10%~90%RH/86~106kpa
Dimension(W×D×H) 531.9mm ×485mm(with ears)×133.2mm
Weight 17.45kg (without HDD)
Installation Rack-mounted