Software/Dahua Toolbox/Remote Snapshot

Revision as of 21:33, 16 February 2018 by Mark (talk | contribs) (Prerequisites)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Remote Snapshot Setup

Description

This is a guide for how to set up Remote Snapshot.

Prerequisites

Video Instructions

Step by Step Instructions

1. Save the file for Remote Snapshot.

ToolBoxEncode1.png

2. Extract the file.

ToolBoxEncode2.png

3. Locate it under Release.

RemoteSnapshot3.png

4. Enter the IP, credentials, then login and click on get.

RemoteSnapshot4.png

5. Press "Start" to snap the picture and you should see the picture in the same folder.

RemoteSnapshot5.png