Difference between revisions of "SmartPSS/How To Setup Event Alarm Link"

(Link Video)
(Link Video)
Line 61: Line 61:
  
  
Use the device tree to select the device.
+
Drag and drop a device from device tree into the grid layout in the center of the screen
  
 
Select from the pre-configured layouts or create your own
 
Select from the pre-configured layouts or create your own

Revision as of 18:01, 28 March 2019

How To Setup Event Alarm Link In SmartPSS

Description

This article will show you how to setup the Event Alarm Link feature in SmartPSS 2.0

Prerequisites

Video Instructions

Coming Soon

Step by Step Instructions

1. Launch SmartPSS.

Preset SmartPSS 1.jpg


2. Click 'Event Config'

How To Setup Event Alarm Link -1.jpg


3. The Event Config menu will appear.


How To Setup Event Alarm Link -2.jpg


4. Click to select the device you wish to configure from the Device Tree on the left

How To Setup Event Alarm Link -3.jpg


5. Select the Event Type for this camera

How To Setup Event Alarm Link -4.jpg


6. Use the tabs on the right to set up the parameters for when the Event is triggered.

Notify

When the event occurs it can give a notification.

How To Setup Event Alarm Link -5.jpg

Notification types:

Alarm Sound: Play sound at local computer

EMap Twinkle: Twinkle notification on EMap

Send Mail: Send an email

Link Video

When event occurs it can link to a camera preview or record.

How To Setup Event Alarm Link -6.jpg


Drag and drop a device from device tree into the grid layout in the center of the screen

Select from the pre-configured layouts or create your own

Alarm Output

When event occurs it can output a signal to trigger an alarm directly on the camera.

How To Setup Event Alarm Link -7.jpg

Select the device from the device tree

Set Auto Open

Duration: Enter a time for the alarm output (in seconds)

Defence Time