Perimeter

Revision as of 23:22, 3 November 2020 by Marques.Phillips (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Perimeter Protection.jpg

Perimeter Protection Icon.jpg Perimeter Protection adds the ability to use an Object Filter on several IVS features. The Object Filter can be set for Human or Motor Vehicle detection.

Supported on IVS Features: Tripwire, Intrusion, Fast Moving

Perimeter Protection
Set Up Configure Alarm Trigger
Notifications
Set Up Perimeter Protection on your device using various interfaces.

> How To Set Up Perimeter Protection Alarm
Configure responses when the Perimeter Protection alarm is triggered, such as email notifications or alarm output.

> Configure Alarm Response
Receive notifications using the mobile app

> Set Up Notifications


Instructions

Icon for type SystemUI Old.pngSystemUI Old

Description

This guide will show how to set up the Perimeter IVS function in the SystemUI with OldGUI

Prerequisites

  • Dahua device with Perimeter IVS function

Video Instructions

Step By Step Instructions

1. From the Main Menu

Click Event

Perimeter - SystemUI Old - 1.jpg

2. Click Smart Plan

Perimeter - SystemUI Old - 2.jpg

3. Use the dropdown box to select the channel

Click the IVS icon (light bulb) to enable the function

Perimeter - SystemUI Old - 3.jpg

4. Click Apply to save

Perimeter - SystemUI Old - 4.jpg

5. Click IVS

Perimeter - SystemUI Old - 5.jpg

6. Click Add to create a new IVS rule

Perimeter - SystemUI Old - 6.jpg

7. Click the Pencil icon under Draw to create the rule

Perimeter - SystemUI Old - 7.jpg

8. The video will full screen

Use the AI recognition interface to enable and set which Effective Targets (targets that will be valid)

Click OK

Perimeter - SystemUI Old - 8.jpg

9. To draw the rule left click inside the video frame to begin drawing

Perimeter - SystemUI Old - 9.jpg

10. Right click to finish drawing

The Rule name will confirm when drawing is complete

Perimeter - SystemUI Old - 10.jpg

11. Click Apply to save all settings

Perimeter - SystemUI Old - 11.jpg

Icon for type SystemUI New.pngSystemUI New

Description

This guide will show how to set up the Perimeter IVS function in the SystemUI with NewUI

Prerequisites

  • Dahua device with Perimeter IVS function

Video Instructions

Step By Step Instructions

1. From the Main Menu

Click AI

Perimeter - SystemUI New - 1.jpg

2. Click Parameters

Perimeter - SystemUI New - 2.jpg

3. Click Smart Plan

Perimeter - SystemUI New - 3.jpg

4. Click Add to create a new Smart Plan

Perimeter - SystemUI New - 4.jpg

5. Click the IVS icon (light bulb) to enable the Smart Plan

Perimeter - SystemUI New - 5.jpg

6. Click Apply to save

Perimeter - SystemUI New - 6.jpg

7. Click IVS

Perimeter - SystemUI New - 7.jpg

8. Click Add to create a new IVS rule

Perimeter - SystemUI New - 8.jpg

9. The new Tripwire rule will appear

Click the pencil icon under draw to create the rule

Perimeter - SystemUI New - 9.jpg

10. The video will fullscreen

Left click inside the video frame to begin drawing the rule

Perimeter - SystemUI New - 10.jpg

Right click to finish drawing

The Rule Name will confirm the rule has been created

Perimeter - SystemUI New - 11.jpg

11. Use the AI recognition interface to enable and set which Effective Targets (targets that will be valid)

Click OK

Perimeter - SystemUI New - 12.jpg

13. Click the icon under Trigger to set any corresponding event triggers

Click Apply to save all settings

Perimeter - SystemUI New - 13.jpg

Icon for type WebUI Old.pngWebUI Old

Description

This guide will show how to set up the Perimeter IVS function in the WebUI with OldGUI

Prerequisites

  • Dahua device with Perimeter IVS function

Video Instructions

Step By Step Instructions

1. From the Main Menu

Click Setting

Perimeter - WebUI Old GUI - 1.jpg

2. Under Event

Click Smart Plan

Perimeter - WebUI Old GUI - 2.jpg

3. Click the IVS icon (light bulb) to enable the IVS rule

Perimeter - WebUI Old GUI - 3.jpg

4. Click Save

Perimeter - WebUI Old GUI - 4.jpg

5. Click IVS

Perimeter - WebUI Old GUI - 5.jpg

6. Click the + to create a new IVS rule

Perimeter - WebUI Old GUI - 6.jpg

7. The new IVS rule will appear in the list

Click Draw Rule to draw the IVS rule

Perimeter - WebUI Old GUI - 7.jpg

8. Left click inside the video frame to begin drawing the rule

Perimeter - WebUI Old GUI - 8.jpg

Right click to finish drawing

The Rule name will confirm when drawing is complete

Perimeter - WebUI Old GUI - 9.jpg

9. Use the Object filter interface to enable and set which Effective objects(targets that will be valid) for the IVS rule

Perimeter - WebUI Old GUI - 10.jpg

10. Click Save to save all settings

Perimeter - WebUI Old GUI - 11.jpg

Icon for type WebUI New.pngWebUI New

Description

This guide will show how to set up the Perimeter IVS function in the WebUI with NewGUI

Prerequisites

  • Dahua device with Perimeter IVS function

Video Instructions

Step By Step Instructions

1. From the Main Menu of the WebUI

Click AI

Perimeter - WebUI New - 1.jpg

2. Click Parameters

Perimeter - WebUI New - 2.jpg

3. Click Smart Plan

Perimeter - WebUI New - 3.jpg

4. Use the dropdown box to select the Channel

Click the IVS icon (light bulb) to enable the IVS rule

Perimeter - WebUI New - 4.jpg

5. Click OK to save

Perimeter - WebUI New - 5.jpg

6. Click IVS

Perimeter - WebUI New - 6.jpg

7. Click the + to create a new IVS rule

Perimeter - WebUI New - 7.jpg

8. The IVS rule will appear in the list

Click Draw Rule to begin drawing the IVS rule

Perimeter - WebUI New - 8.jpg

9. Left click inside the video frame to begin drawing the rule

Perimeter - WebUI New - 9.jpg

Right click to finish drawing

Perimeter - WebUI New - 10.jpg

10. Use the AI recognition interface to enable and set which Effective objects(targets that will be valid) for the IVS rule

Perimeter - WebUI New - 11.jpg

11. Click OK to save all settings

Perimeter - WebUI New - 12.jpg

DSS Mobile2 Icon.jpgDSS4004-S2 & DSS7016-S2