PTZTour

Revision as of 19:44, 14 August 2019 by Arran Williams (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

How to Setup Tour

Description

The Tour feature allows you to set a up multiple locations for the PTZ to cycle through using already established Pre-Sets.

Prerequisites

  • Dahua Network PTZ
  • Internet Explorer
  • IP Address of Network PTZ

Video Instructions

Step by Step Instructions

1. Login to your IP PTZ camera via Internet Explorer.

PTZScan1.png

2. Under, "PTZ Settings" click the drop down, and select, "Tour"

PTZTour1.png

3. The box immediately below the drop down is the, "Pre-Set Number" This can be set to 1-8 (May vary by model) Ensure that this is currently set to, "1"

PTZTour2.png

4. In the second box, input the first Pre-Set you wish to establish and click, "Add Pre-Set"

PTZTour3.png

5. In the second box, input the second Pre-Set you wish to establish and click, "Add Pre-Set" Repeat this process for any additional Pre-Sets you wish to use.

PTZTour4.png

6. Once complete, you can test your Tour settings by clicking, "Start"

PTZTour5.png