New GUI/AI/Missing Setup

Revision as of 18:33, 8 August 2019 by Marques.Phillips (talk | contribs)

How To Setup Missing Object

Description

This article will show you how to setup the Missing Object IVS feature on a supported device

Prerequisites

  • Supported device with Missing Object feature

Video Instructions

Step by Step Instructions

1. From the Main Menu click AI

How To Setup Intrusion - NewUI - 1.jpg

2. Click Parameters > Smart Plan

How To Setup Intrusion - NewUI - 2.jpg

3. Use the drop down box to select the Channel

How To Setup Intrusion - NewUI - 3.jpg

4. Click the IVS icon to enable.

How To Setup Intrusion - NewUI - 4.jpg

The icon will highlight when selected.

Click Apply

How To Setup Intrusion - NewUI - 5.jpg

5. Click Parameters > IVS

How To Setup Intrusion - NewUI - 6.jpg

6. Use the drop-down box to select the Channel

Then click Add in the lower right side of the screen to Add an IVS rule

How To Setup Intrusion - NewUI - 7.jpg

7. The created rule will appear in the list

How To Setup Intrusion - NewUI - 8.jpg

8. Use the dropdown box to change the Rule Type to "Missing"

How To Setup Missing - NewGUI - 2.jpg

10. Click the Pencil icon to draw the Missing Object rule

How To Setup Missing - NewGUI - 3.jpg

11. The Channel will fullscreen.

Left click anywhere inside the video frame to begin drawing the detection area for the object.

How To Setup Missing - NewGUI - 4.jpg

Right click to end drawing

How To Setup Missing - NewGUI - 5.jpg

12. You can use the Missing menu that appears for additional rule settings:

How To Setup Missing - NewGUI - 6.jpg

  • Name: A name can be applied to the rule
  • Period: Set a time (in seconds) for the Missing object rule to trigger


Click Tripwire Setup - NewGUI - Target Filter.jpg icon to set the Target Filter (maximum and minimum size size for Objects to follow rule)

Click Tripwire Setup - NewGUI - Trash Icon.jpg icon to clear the current rule

Once the Missing Object rule settings have been created click OK

13. Click the Tripwire Setup - NewGUI - Trigger.jpg icon to set the Trigger settings when the IVS Missing Object rule is engaged.

How To Setup Missing - NewGUI - 7.jpg

14. The Trigger menu will appear

How To Setup Missing - NewGUI - 8.jpg

Once the trigger rule settings have been created click OK

15. Once all Missing Object settings have been configured, Click Apply in the lower right of the screen to save all changes

How To Setup Missing - NewGUI - 9.jpg

16. The created Missing rule is now programmed

How To Setup Missing - NewGUI - Complete.jpg