Difference between revisions of "NVR/Backup/Local Backup"
(→Backup via USB) |
(→Backup via USB) |
||
| Line 1: | Line 1: | ||
==Backup via USB== | ==Backup via USB== | ||
| − | |||
Note: This is for local back up on physical recorder. | Note: This is for local back up on physical recorder. | ||
| − | Step 1. From the Main Menu select "Back Up" | + | '''Step 1.''' From the Main Menu select "Back Up" |
| − | Step 2. Plug in USB device such as a flash drive in to one of the USB ports of the recorder. | + | '''Step 2.''' Plug in USB device such as a flash drive in to one of the USB ports of the recorder. |
| − | Step 3. A pop up will show > Select "File Back up" | + | '''Step 3.''' A pop up will show > Select "File Back up" |
| − | Step 4. Select "Browse" > Select folder to save back file in. | + | '''Step 4.''' Select "Browse" > Select folder to save back file in. |
| − | Step | + | '''Step 5'''. Select "Type" such as Alarm or MD (Motion Detect). |
| − | Step | + | '''Step 6.''' Select "Start Time" and "End Time". |
| − | Step | + | '''Step 7.''' Select "Channel" > "Add" to add what you have selected. |
| − | Step | + | '''Step 8.''' Select "Start" to start back up. |
Revision as of 20:41, 11 February 2016
Backup via USB
Note: This is for local back up on physical recorder.
Step 1. From the Main Menu select "Back Up"
Step 2. Plug in USB device such as a flash drive in to one of the USB ports of the recorder.
Step 3. A pop up will show > Select "File Back up"
Step 4. Select "Browse" > Select folder to save back file in.
Step 5. Select "Type" such as Alarm or MD (Motion Detect).
Step 6. Select "Start Time" and "End Time".
Step 7. Select "Channel" > "Add" to add what you have selected.
Step 8. Select "Start" to start back up.
