Difference between revisions of "Mobile Solution/How To Install SIM Card and SD Card"

Revision as of 19:35, 22 June 2021

This article will show how to install a SIM Card and SD Card for Mobile Recorder

Make sure the power supply is disconnected. If it is not, the Device automatically shuts down when the door lock switch is opened.

1. Press the left front cover.

The left front cover automatically opens.

2. Insert the key (included with device) and turn to unlock the door

3. Loosen the two screws at the front panel

4. Pull the HDD carrier out along the guide rail

5. SIM Card and SD card slots are shown below

Please make sure the gold part of the SIM card makes contact to the module

Revision as of 19:26, 22 June 2021 (view source) Marques.Phillips (talk \| contribs) (→‎Step by Step Instructions) ← Older edit		Revision as of 19:35, 22 June 2021 (view source) Marques.Phillips (talk \| contribs) (→‎Step by Step Instructions) Newer edit →
Line 37:		Line 37:

	[[File:Mobile_Recorder_SIM_Card_and_SD_Card_3.jpg\|400px]]		[[File:Mobile_Recorder_SIM_Card_and_SD_Card_3.jpg\|400px]]
		+
		+
		+
		+	Please make sure the gold part of the SIM card makes contact to the module