Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.


Revision as of 21:43, 26 June 2023 by AlexS (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

How to Set IP Camera to Static

Note: If your IP Camera is connected to the back of an NVR, these instructions will not apply. Please see, "How to Connect IP Camera to NVR"

1. Open a web browser and input the camera's IP address


4. Login to the camera's web interface

5. Click, "Setup"

6. Click, "Network"


7. Click, "TCP/IP"

8. Change Mode from, "DHCP" to "Static"

9. Input the IP address, subnet mask, Default Gateway, and primary and alternate DNS server.


10. Click, "Save"