IPCRemoteAccess

Revision as of 18:47, 12 October 2015 by JP (talk | contribs)

How to Setup Remote Access for IP Camera

Note: This setup is only for IP cameras that are not connected to the same LAN as the NVR or recording device.

1. Connect IP Camera to network with a CAT5 cable. (Note: If the modem, router, or switch connected to the IP Camera is not capable of POE, you will need to connect a separate power supply to the IP Camera.)

2. Download and install ConfigTool from DahuaSecurity.com, under Support->Download Center->Software ConfigToolIPC.jpg

3. Run the ConfigTool.

4. The ConfigTool should display your IP Camera. Click the, "ConfigToolIPCEIcon.jpg" icon to open Internet Explorer and access your IP Camera.

5. Configure Internet Explorer security settings to allow the plugs to work. Link to Internet Explorer Setup

6. Login with the default credentials: User Name: admin Passsword: admin