EVS/How To Add To DSS

Revision as of 23:01, 13 December 2021 by Nicky Gunakan (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

How to add EVS to DSS

Description

This article is to show user how to add EVS to DSS unit as an extended storage. In this tutorial, we are using DSS Pro UI.

Prerequisites

  • EVS with or without RAID setup.
  • DSS Hardware or Software

Step by Step Instruction

1. Locate EVS System Manager from web browser.

EVS System Manager.png

2. Click on IPSAN and choose Storage Pool. Click Add to create new Storage Pool.

EVS Storage Pool 1.png

3. Enter the Pool Name and select your RAID Array or individual disk that are available. Then, click OK.

EVS Storage Pool 2.png

4. The system will prompt you that all data in the HDD will be formatted, click OK to continue.

EVS Storage Pool 3.png

5. Your Storage Pool is now created. Repeat step #2 if you have multiple RAID Array or disk for your EVS.

EVS Storage Pool 4.png

6. Go to Share Account menu and then click on Add.

EVS Shared Account 1.png

7. Enter Username and Password you wish to create for your Storage allocation, then click OK.

EVS Shared Account 2.png

8. Your Share Account is now created.

EVS Shared Account 3.png

9. Go to Share Folder menu and then click on Add.

EVS Share Folder 1.png

10. Enter the Directory Name, and then select your storage pool that created on step 2. Choose Share Type to ISCSI, and do not select any share user. Then, click OK.

EVS Share Folder 2.png

11. Your share folder is now created. Repeat step #10 if you have multiple storage pool created for your EVS.

EVS Share Folder 3.png

12. Your EVS is now ready to be added to DSS.

13. Login to DSS Web Manager, and go to Storage.

14. Go to Storage Config and click on Add.

EVS DSS Pro Netdisk Add.png

15. Enter EVS IP Address and username and password that created under Share Account in EVS (Step #7). Click OK.

EVS DSS Pro Netdisk Add 2.png

16. DSS will retrieve all existing storage pool that created in EVS. Click on the brush icon to to format and initialize the HDD in DSS. You will be asked whether you want to set this storage pool for video recording or ANPR Picture.

  If you have multiple storage pool, you must click format on each storage pool.

EVS DSS Pro Netdisk Format.png

EVS DSS Pro Netdisk Allocation.png

17. Once HDD is formatted, the storage pool status will show Normal, and this is ready to use.

EVS DSS Pro Netdisk Ready.png