DSS/V8/DSS Pro/Instruction/Add Device via P2P

Revision as of 22:48, 14 February 2024 by AlexS (talk | contribs) (Created page with "=Add Device via P2P to DSS Pro V8= ==Description== This article will cover how to add a device via P2P on DSS Pro V8 ==Prerequisites== * DSS Pro V8 Server and Client * Dahua...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Add Device via P2P to DSS Pro V8

Description

This article will cover how to add a device via P2P on DSS Pro V8

Prerequisites

  • DSS Pro V8 Server and Client
  • Dahua Device connected to the network with P2P enabled and online

Step by Step Instructions

1. From the Home screen, select the Wrench Icon on the left

DSSProV8P2PSetup1.jpg

2. Click on Device under "Basic Config"

DSSProV8P2PSetup2.jpg

3. Select + Add at the top

DSSProV8P2PSetup3.jpg

4. Click on the drop-down below Add Mode and select P2P.
Enter the Serial Number of the device under SN.
Enter the username and password in the Username and Password fields.
Click on Add at the bottom

DSSProV8P2PSetup4.jpg

5. Enter name for the device under Device Name.
Click on OK at the bottom

DSSProV8P2PSetup5.jpg

6. The device will be added to the list.
Verify that the Online Status has a green dot and says "Online"

DSSProV8P2PSetup6.jpg

7. Click on the Home tab at the top.
Then select Monitoring Center

DSSProV8P2PSetup7.jpg

8. Double-click on the device on the left to pull up the live view of the cameras

DSSProV8P2PSetup8.jpg