Access Control/Products/ASI1212D/How to Setup Ring Function on DHI-ASI1212D
Revision as of 19:50, 11 August 2021 by AlexS (talk | contribs) (Created page with "This guide demonstrates wiring the 'Ring' function. A light is in place to show when the relay has been successfully triggered Please reference the device Wiring Guide for th...")
This guide demonstrates wiring the 'Ring' function. A light is in place to show when the relay has been successfully triggered
Please reference the device Wiring Guide for the correct relay connections for your purposes
1. Check the wiring diagram to confirm what connections need to be made
For Ring function:
The Red and Black wires labeled CON3 are used
2. Wire the connections in line with the desired devices (and power if required) to complete a circuit.
In this example a light (and external power) is being used to show when the relay has been successfully triggered.
3. After wiring the circuit press the Ring button and the relay should engage
In this example, the light will turn on