NKB3000 Display Live Feed

Revision as of 02:00, 11 March 2016 by Nathan (talk | contribs) (Step by Step Setup Instructions)

How to Display Live Feed on NKB3000

Pre-Requisites

  • NKB3000
  • NVR or IP camera
  • IP address of the NVR or IP camera

Step by Step Setup Instructions

1. Connect a network, and power cable to your NKB3000. The screen should look like the below image once booted.

NKB3k008.JPG

2. Hit General on the NKB3000.

NKB3k009.JPG

3. Input your NKB3000's password, and hit Enter.

NKB3k010.JPG

Note: The default NKB3000 credentials are as follows: User Name: admin Password: admin

4. Using the joystick, navigate to "Settings" and press, "Enter"

NKB3k012.JPG

5. Using the joystick, navigate to "Network" and press, "Enter"

NKB3k016.JPG

6. Check DHCP or connect to your wireless network and select save:

NKB3k017.JPG NKB3k018.JPG

7. After connecting to a network go to the main menu and select Device:

500px

8. Select refresh and the page should populate IP cameras and NVRs on your network. Select the device(s) you want to display and select ADD

NKB3k042.JPG

9. Go to the main menu and Select Input

NKB3k054.JPG

10. Select the Camera you want to add via any NVR that you've added and select sync.

NKB3k056.JPG

11. Now select Account on the Main Menu:

NKB3k062.JPG

12. Now Modify or create a user account (or use 666666 - user)

NKB3k069.JPG

13. Also add the camera or NVR onto the user account

NKB3k067.JPG

14. Logout and login to the user account

NKB3k085.JPG

15. Select Device List

NKB3k086.JPG

16. Make sure your Device (IPC or NVR) populates in this field.

NKB3k087.JPG

17. Go back to the Main Menu and select Input List

NKB3k089.JPG

18. Now select your device(s) and select sync

NKB3k091.JPG