Template:LincX2PRO Add to Recorder WebUI New

Revision as of 23:54, 25 February 2020 by Marques.Phillips (talk | contribs)

Description

These instructions will show you how to add a LincX2PRO device to a Dahua recorder at the WebUI with NewUI

Prerequisites

  • LincX2PRO device
  • Dahua NVR, DVR, or XVR, on same network as LincX2PRO device

Video Instructions

Step By Step Instructions

1. From the Main Menu of the WebUI

Click Management

Click Camera

Add DB11 Dahua Recorder - WebUI New - 1.jpg

2. Under Registration

Click Device Search

The recorder will scan the local network for devices

Add DB11 Dahua Recorder - WebUI New - 2.jpg

3. If the device does not appear you can add it manually

Click Manual Add

Add DB11 Dahua Recorder - WebUI New - 3.jpg

4. The Manual Add interface will appear

Enter the corect information for the device

  • IP Address
  • TCP Port
  • Username
  • Password

Click OK

Add DB11 Dahua Recorder - WebUI New - 4.jpg

5. The device will move to Added Device

Click the Pencil icon under Modify to change any settings form the device, such as Password or Port information (if required)

Add DB11 Dahua Recorder - WebUI New - 5.jpg

6. Once the device is successfully connected you will see a green light under status

Add DB11 Dahua Recorder - WebUI New - 6.jpg

7. The device video feed will appear in live view

Add DB11 Dahua Recorder - WebUI New - 7.jpg