Please note that after Oct 20th, P2P device adding on DMSS will require to sign in with a registered account. For how to create a DMSS account use the following link https://dahuawiki.com/DMSS/Create_Dahua_Account . Also you can use the following steps on how to add a device https://dahuawiki.com/DMSS/Add_Dahua_Device_via_P2P and lastly you can use the following link on how to move your local devices over to your account https://dahuawiki.com/DMSS/Transfer
Accessories/Other/PFM820/Physical Setup
Contents
[hide | ◄ ► ]PFM820 Physical Setup
Description
These instructions will show you how to physically connect the PFM820 to an HD-CVI camera to either access the OSD or change the video output mode.
Prerequisites
- HD-CVI Camera
- PFM820
- HD-CVI Camera Power Supply
- BNC Cable
- HD-CVI Recorder
Video Instructions
Step by Step Instructions
1. Locate the camera's BNC connection and disconnect the BNC cable.
=> 
2. Attach the PFM820 to the cameras BNC connection.
3. Attach the BNC cable from your recorder to the other end of the PFM820.
