Thermal/DHI-ASI7213X-T1/Instructions/Update Firmware

Update Firmware: DHI-ASI7213X-T1

Description

The below instructions will show you how to update the normal and MCU firmware on the DHI-ASI7213X-T1.

Firmware Downloads

Build Date: 07-15-2022	Build Date: 05-12-2020
Firmware	MCU Firmware

Step by Step Instructions

[Expand]

SystemUI+USB Drive

Prerequisites

• DHI-ASI7213X-T1
• USB Drive(8GB or smaller)

Step by Step Instructions

1. Enable "File name extensions" on File Explorer and rename the MCU file to "update.bin"

2. Login on the access control monitor.

3. Tap "USB".

4. Tap "USB Update".

5. Confirm with the update.

6. Wait for the update to finish, don't power off the device at this screen!

7. Wait for the update to finish, don't power off the device at this screen!

[Expand]

WebUI

=Update Firmware via WebUI=

Prerequisites

• DHI-ASI7213X-T1
• LAN Access from a Windows PC
• Internet Explorer or Chrome

Video Instructions

Step by Step Instructions

Download the firmware files for the device (3 in total):

1. Log into the webUI of the device by typing the IP address into Internet Explorer

2. Click Upgrade

3. Click Browse

4. Select the firmware file, click Open

5. Click Upgrade

A prompt will appear showing the status of the update:

A message will confirm a successful upgrade and the unit will reboot

Repeat the process for all required firmware files

Troubleshooting

In the event the MCU firmware update fails:

• Power down unit
• Reconnect/secure the module
• Power device on
• Attempt Firmware upgrade again
• Make sure the module is properly connected, then attempt the firmware update again