Difference between revisions of "NVR/Quick Start"
| Line 4: | Line 4: | ||
====NVR/DVR==== | ====NVR/DVR==== | ||
*NVR Recorder | *NVR Recorder | ||
| + | [[file:DSC_1922_(Large).JPG]] | ||
*Power Cable (1 or 2 Pieces Depending on Model) | *Power Cable (1 or 2 Pieces Depending on Model) | ||
| + | [[file:DSC_1927_(Large).JPG]] | ||
*Quick Start Guide | *Quick Start Guide | ||
*USB Mouse | *USB Mouse | ||
| + | [[file:DSC_1928_(Large).JPG]] | ||
*IR Remote (Not included with all models) | *IR Remote (Not included with all models) | ||
*HDMI Cable | *HDMI Cable | ||
*CAT5 Network Cable (For NVR Only) | *CAT5 Network Cable (For NVR Only) | ||
*SATA Cable | *SATA Cable | ||
| + | [[file:DSC_1925_(Large).JPG]] | ||
====IP Camera==== | ====IP Camera==== | ||
*IP Camera | *IP Camera | ||
| Line 28: | Line 32: | ||
===Initial Setup:=== | ===Initial Setup:=== | ||
1. Location: Determine where you will install your system. Ideally, this should be somewhere close to your modem or router. | 1. Location: Determine where you will install your system. Ideally, this should be somewhere close to your modem or router. | ||
| + | [[file:DSC_1931_(Large).JPG]] | ||
2. Connect the mouse to the system’s USB port found on the back of the system. | 2. Connect the mouse to the system’s USB port found on the back of the system. | ||
| + | [[file:DSC_1932_(Large).JPG]] | ||
3. (Optional) Connect a network cable to the system and your router or modem. | 3. (Optional) Connect a network cable to the system and your router or modem. | ||
| + | [[file:DSC_1933_(Large).JPG]]+[[file:DSC_1934_(Large).JPG]] | ||
4. Connect a VGA or HDMI cable to the system and the display. | 4. Connect a VGA or HDMI cable to the system and the display. | ||
| − | + | [[file:DSC_1940_(Large).JPG]] | |
6. Connect the power cable to your system and surge protector. | 6. Connect the power cable to your system and surge protector. | ||
7. Connect your cameras to the back of the system (and power, if applicable). | 7. Connect your cameras to the back of the system (and power, if applicable). | ||
Revision as of 19:33, 2 May 2016
Contents
Quick Start Guide
Note: For more information and instructions on how to operate your Dahua device, please visit www.DahuaWiki.com
Inventory: Unpack and ensure all items included with the package are present.
NVR/DVR
- NVR Recorder
Error creating thumbnail: Unable to save thumbnail to destination
- Power Cable (1 or 2 Pieces Depending on Model)
Error creating thumbnail: Unable to save thumbnail to destination
- Quick Start Guide
- USB Mouse
Error creating thumbnail: Unable to save thumbnail to destination
- IR Remote (Not included with all models)
- HDMI Cable
- CAT5 Network Cable (For NVR Only)
- SATA Cable
Error creating thumbnail: Unable to save thumbnail to destination
IP Camera
- IP Camera
- Quick Start Manual
- Product CD
- Mounting Sticker
- Screws and Drywall mounts
Accessory
- Mount or Accessory
- Mounting hardware
Necessary (Hardware Not Included)
- 3.5” Hard Drive
- Phillips Screwdriver
- CAT5 Network Cable for cameras
- Internet Connection and Router/Modem (Required for Remote Access)
- VGA or HDMI Display (Preferably 1080P or higher resolution)
Initial Setup:
1. Location: Determine where you will install your system. Ideally, this should be somewhere close to your modem or router.
Error creating thumbnail: Unable to save thumbnail to destination
2. Connect the mouse to the system’s USB port found on the back of the system.
Error creating thumbnail: Unable to save thumbnail to destination
3. (Optional) Connect a network cable to the system and your router or modem.
Error creating thumbnail: Unable to save thumbnail to destination
+Error creating thumbnail: Unable to save thumbnail to destination
4. Connect a VGA or HDMI cable to the system and the display.
Error creating thumbnail: Unable to save thumbnail to destination
6. Connect the power cable to your system and surge protector. 7. Connect your cameras to the back of the system (and power, if applicable). 8. (If Applicable)Flip the power switch on the back of the unit to boot up your system.
Quick Setup:
Quick Start Wizard: Once the system has booted up, a window will pop-up guiding you through the initial setup of your system. You can change these settings later in case you make a mistake.
- Password: http://dahuawiki.com/NVR/Basic_Setup/Change_User_Name_or_Password
- Date and Time: http://dahuawiki.com/NVR/Basic_Setup/Date_and_Time
- Format HDD: http://dahuawiki.com/NVR/Basic_Setup/Format_HDD
Recording, Playback, and Backup:
Recording: Schedule or Motion
- Schedule Record: http://dahuawiki.com/NVR/Recording_Setup/Schedule_Record
- Motion Record: http://dahuawiki.com/NVR/Recording_Setup/Motion_Record
Playback
- NVR Interface: http://dahuawiki.com/NVR/Playback/Playback
- Web Interface: http://dahuawiki.com/IP_Camera/Playback/Playback_Web_Browser
Backup
- Local Backup USB: http://dahuawiki.com/BackupLocal
- Remote Backup Browser: http://dahuawiki.com/BackupBrowser
- Remote Backup via SmartPSS: http://dahuawiki.com/BackupSmartPSS
Remote Access:
Remote Access-PC
- Internet Explorer Setup: http://dahuawiki.com/Troubleshoot/Internet_Explorer
- Local (LAN) Access: http://dahuawiki.com/ConfigToolLocate
- Port Forward Setup: http://dahuawiki.com/RemoteAccessPF
- P2P Setup: http://dahuawiki.com/RemoteAccessP2P
- SmartPSS Access via P2P: http://dahuawiki.com/SmartPSSAddP2P
Remote Access-Mobile: iDMSS(iPhone) / gDMSS(Android)
- Android Download: https://play.google.com/store/apps/details?id=com.mm.android.direct.gdmssphoneLite
- iPhone Download: https://itunes.apple.com/us/app/idmss-lite/id517936193?mt=8
- Mobile Access via P2P: http://dahuawiki.com/IDMSSP2PSetup
- Mobile Access via IP: http://dahuawiki.com/IDMSSIPSetup
