Difference between revisions of "Thermal/DHI-ASI7213X-T1/Instructions/Alarm Input and Output"

(→‎High Body Temperature Indication Light)
(→‎Door Strike and Door Release Button Physical Setup)
Line 278: Line 278:
  
 
==Door Strike and Door Release Button Physical Setup==
 
==Door Strike and Door Release Button Physical Setup==
 +
{| class="wikitable"
 +
!|Port
 +
!colspan="2"|Cable Color
 +
!|Cable Name
 +
!|Description
 +
|-
 +
|+CON3
 +
|-
 +
|rowspan="9"|CON3
 +
|-
 +
|Black and red
 +
|[[File:Wire_black_red_stripe.svg|35px]]
 +
|RX
 +
|RS-232 receiving port.
 +
|-
 +
|Black and orange
 +
|[[File:Wire_black_orange_stripe.svg|35px]]
 +
|TX
 +
|RS-232 sending port.
 +
|-
 +
|Black and blue
 +
|[[File:Wire_black_blue_stripe.svg|35px]]
 +
|GND
 +
|Connected to the common GND port.
 +
|-
 +
|Black and gray
 +
|[[File:Wire_black_gray_stripe.svg|35px]]
 +
|SR1
 +
|Used for door contact detection.
 +
|-
 +
|Black and green
 +
|[[File:Wire_black_green_stripe.svg|35px]]
 +
|PUSH1
 +
|Door open button of door No.1
 +
|-
 +
|Black and brown
 +
|[[File:Wire_black_brown_stripe.svg|35px]]
 +
|DOOR1_COM
 +
|Lock control common port.
 +
|-
 +
|Black and yellow
 +
|[[File:Wire_black_yellow_stripe.svg|35px]]
 +
|DOOR1_NO
 +
|Lock control normally open port.
 +
|-
 +
|Black and purple
 +
|[[File:Wire_black_purple_stripe.png|35px]]
 +
|DOOR1_NC
 +
|Lock control normally closed port.
 +
|}

Revision as of 15:24, 19 June 2020

Alarm Input and Output

Cable Connections
Physical Setup

Web Interface

  • Alarm Linkage

  • Alarm Linkage Log

  • Alarm Linkage-Modify

Cable Connections

  • Alarm1 = Normal
  • Alarm2 = High Temp
  • No alert for mask or face detection currently.

Contact 1

Port Cable Color Cable Name Description
CON1
CON1
Black Wire black.svg RD– Negative electrode of external card reader.
Red 35px RD+ Positive electrode of external card reader.
Blue 35px CASE Tamper alarm input of the external card reader.
White 35px D1 Wiegand D1 input (connected to external card reader)/output (connected to controller).
Green 35px D0 Wiegand D0 input (connected to external card reader)/output (connected to controller).
Brown 35px LED Connected to external reader indicator in
Yellow 35px B RS-485 negative electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module).
  • If the security module is enabled, you need to purchase access control security module separately. The security module needs separate power supply to provide power.
  • Once the security module is enabled, the exit button, lock control and firefighting linkage will be invalid.
Purple Wire purple.png A RS-485 positive electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module).
  • If the security module is enabled, you need to purchase access control security module separately. The security module needs separate power supply to provide power.
  • Once the security module is enabled, the exit button, lock control and firefighting linkage will be invalid

Contact 2

Port Cable Color Cable Name Description
CON2
CON2
White and red 35px ALARM1_NO Alarm 1 normally open output port
White and orange 35px ALARM1_COM Alarm 1 common output port.
White and blue 35px ALARM2_NO Alarm 2 normally open output port.
White and gray 35px ALARM2_COM Alarm 2 common output port.
White and green File:Wire white green stripe.svg GND Connected to the common GND port.
White Brown 35px ALARM1 Alarm 1 input port.
White and yellow File:Wire white yellow stripe.svg GND Connected to the common GND port.
White and purple Wire white purple stripe.png ALARM2 Alarm 2 input port.

Contact 3

Port Cable Color Cable Name Description
CON3
CON3
Black and red 35px RX RS-232 receiving port.
Black and orange File:Wire black orange stripe.svg TX RS-232 sending port.
Black and blue Wire black blue stripe.svg GND Connected to the common GND port.
Black and gray Wire black gray stripe.svg SR1 Used for door contact detection.
Black and green 35px PUSH1 Door open button of door No.1
Black and brown 35px DOOR1_COM Lock control common port.
Black and yellow File:Wire black yellow stripe.svg DOOR1_NO Lock control normally open port.
Black and purple Wire black purple stripe.png DOOR1_NC Lock control normally closed port.

Normal Body Temperature Indication Light

Port Cable Color Cable Name Description
CON2
CON2
White and red 35px ALARM1_NO Alarm 1 normally open output port
White and orange 35px ALARM1_COM Alarm 1 common output port.
White and blue 35px ALARM2_NO Alarm 2 normally open output port.
White and gray 35px ALARM2_COM Alarm 2 common output port.
White and green File:Wire white green stripe.svg GND Connected to the common GND port.
White Brown 35px ALARM1 Alarm 1 input port.
White and yellow Wire white yellow stripe.svg GND Connected to the common GND port.
White and purple Wire white purple stripe.png ALARM2 Alarm 2 input port.

High Body Temperature Indication Light

Port Cable Color Cable Name Description
CON2
CON2
White and red 35px ALARM1_NO Alarm 1 normally open output port
White and orange 35px ALARM1_COM Alarm 1 common output port.
White and blue 35px ALARM2_NO Alarm 2 normally open output port.
White and gray 35px ALARM2_COM Alarm 2 common output port.
White and green File:Wire white green stripe.svg GND Connected to the common GND port.
White Brown 35px ALARM1 Alarm 1 input port.
White and yellow Wire white yellow stripe.svg GND Connected to the common GND port.
White and purple Wire white purple stripe.png ALARM2 Alarm 2 input port.

Door Strike and Door Release Button Physical Setup

Port Cable Color Cable Name Description
CON3
CON3
Black and red 35px RX RS-232 receiving port.
Black and orange Wire black orange stripe.svg TX RS-232 sending port.
Black and blue Wire black blue stripe.svg GND Connected to the common GND port.
Black and gray Wire black gray stripe.svg SR1 Used for door contact detection.
Black and green 35px PUSH1 Door open button of door No.1
Black and brown 35px DOOR1_COM Lock control common port.
Black and yellow File:Wire black yellow stripe.svg DOOR1_NO Lock control normally open port.
Black and purple Wire black purple stripe.png DOOR1_NC Lock control normally closed port.
Retrieved from "https://DahuaWiki.com/index.php?title=Thermal/DHI-ASI7213X-T1/Instructions/Alarm_Input_and_Output&oldid=64846"