Tripwire

Perimeter Protection example.jpg


IVSIconTripwire.png When the detection target crosses the warning line along the set direction, the system will push one alarm and performs any alarm linkage action.
Tripwire
Set Up Configure Alarm Trigger
Notifications
Set Up Tripwire on your device using various interfaces.

> How To Set Up Tripwire
Configure responses when the tripwire alarm is triggered, such as email notifications or alarm output.

> Configure Tripwire Response
Receive notifications using the mobile app

> Set Up Notifications

Instructions

Icon for type SystemUI Old.pngSystemUI Old

Video Instructions

Step By Step Instructions

1. From the Main Menu select Event in the Setting section

2. Select Smart Plan on the left. Then select the camera channel at the top. Select and highlight IVS (You may need to deselect any other options). Select Apply and then OK

3. Select IVS on the left. Then choose the channel number at the top. Select Add at the bottom to create a new IVS alarm rule. Click on the drop-down menu under Type for the new rule you created and change set it to Tripwire. Select the Pencil icon under Draw

4. Left click anywhere on the camera view to start the tripwire line. Left click anywhere else on the camera view to complete the segment of the line. Continue moving your mouse and left clicking to continue making multiple segments of the tripwire line.

When done drawing the line segments, right click to finish the line. Give this rule a name by selecting the text box next to Name and typing in a name.

Select the drop-down menu next to Direction to choose if the IVS alarm is triggered in both directions (Both) or just one direction ("A To B" or "B To A")

5. When you are done configuring the Tripwire rules, select OK

6. Select the Gear icon under Trigger to configure what happens when the tripwire alarm is triggered:

> Configure Tripwire Response

Select Apply to save the settings

Icon for type SystemUI New.pngSystemUI New

Video Instructions

Step by Step Instructions

1. From the Main Menu select AI

How To Setup Intrusion - NewUI - 1.jpg

2. Select Parameters on the left.

Select Smart Plan.

How To Setup Intrusion - NewUI - 2.jpg

3. Use the drop down box to select the Channel

How To Setup Intrusion - NewUI - 3.jpg

4. Click and highlight IVS (You may need to de-select any other options).

How To Setup Intrusion - NewUI - 4.jpg

The icon will highlight when selected.

Click Apply

How To Setup Intrusion - NewUI - 5.jpg

5. Click Parameters > IVS

How To Setup Intrusion - NewUI - 6.jpg

6. Use the drop-down box to select the Channel

Then click Add in the lower right side of the screen to Add an IVS rule

How To Setup Intrusion - NewUI - 7.jpg

7. The created rule will appear in the list

How To Setup Intrusion - NewUI - 8.jpg


9. Click the Pencil icon to draw the Tripwire rule

Tripwire Setup - NewGUI - 9.jpg

10. The Channel will fullscreen.

Left click anywhere inside the video frame to begin drawing the Trip line, then use the mouse to draw the trip line.

Right click to end drawing

Tripwire Setup - NewGUI - 10.jpg

Tripwire Setup - NewGUI - 11.jpg

11. The Tripwire menu will appear

Tripwire Setup - NewGUI - 12.jpg

  • Name: A name can be applied to the rule
  • Direction: Both, A To B, B To A

Click Tripwire Setup - NewGUI - Target Filter.jpg icon to set the Target Filter (maximum and minimum size size for Objects to follow rule)

Click Tripwire Setup - NewGUI - Trash Icon.jpg icon to clear the current rule

Once the tripwire rule settings have been created click OK

12. Click the Tripwire Setup - NewGUI - Trigger.jpg icon to set the Trigger settings when the IVS Tripwire rule is engaged.

Tripwire Setup - NewGUI - 13.jpg

> Configure Tripwire Response

Click Apply to save the settings

Icon for type WebUI Old.pngWebUI Old

Video Instructions

Step By Step Instructions

1. Navigate in a web browser to the IP address of the camera or recorder and log into the device

TripwireService1.PNG


2.Select Setting -> Event -> IVS.

TripwireService2.PNG


3. Next to Rule Type click "+" in the new rule that shows below, define the Rule Name and in the drop down select "Tripwire" as the rule type

TripwireService3.PNG


4. Once the rule is created and named, use "Draw Rule" to place your Tripwire line and under the "Direction drop down define in which direction, if only one, crossing is prohibited. In this example crossing from B -> A is prohibited.

TripwireService4.PNG


5. Click "Setting" next to Period and a new window will appear. Here you can set the active time periods for the tripwire. By default the tripwire will be active 24/7. Each day can be edited individually or you can select multiple at once by checking the boxes and using the forms below to enter times. Up to 6 periods can be set for each day.

6. Next be sure to check any other options you may want such as Record & Record Delay, Snapshot, Relay out (1, 2, or both)alarm Delay and email.

> Configure Tripwire Response

Note: For instructions on email setup see Email Setup.

To record or save snapshots an SD card or recorder is required.

TripwireService6.PNG


7. When finished click Save.

TripwireService7.PNG

Icon for type WebUI New.pngWebUI New

Video Instructions

Step By Step Instructions

1. Navigate in a web browser to the IP address of the camera or recorder and log into the device

IVSTripwireWebUINew1.png

2. From the Main Menu select AI

IVSTripwireWebUINew2.png

3. Select Parameters on the left.
Then select Smart Plan.
Select the camera channel at the top.
Select and highlight IVS (You may need to de-select any other options).
Select OK

IVSTripwireWebUINew3.png

4. Select IVS on the left.
Then choose the channel number at the top right and if the IVS will be done by the camera or by the recorder, by selecting either "AI by Camera" or "AI by Device" below the channel number.
Select the Plus button on the right to create a new IVS alarm rule

IVSTripwireWebUINew4.png

5. Double-click on the option under Type for the new rule you created and set it to Tripwire.
Give this rule a name by double-clicking the text box under Name and typing in a name.
Select the Draw Rule button on the left.
Left click anywhere on the camera view to start the tripwire line.
Left click anywhere else on the camera view to complete the segment of the line. Continue moving your mouse and left clicking to continue making multiple segments of the tripwire line.
When done drawing the line segments, right click to finish the line.

IVSTripwireWebUINew5.png

6. Select Draw Target.
Then select Max Size and adjust the size of the box on the camera view to the relative maximum size for a target that can trigger the tripwire.
Select Min Size and adjust the size of the box on the camera view to the relative minimum size for a target that can trigger the tripwire

IVSTripwireWebUINew6.png

7. Select the drop-down menu next to Direction to choose if the IVS alarm is triggered in both directions ("Both") or just one direction ("A To B" or "B To A").
Adjust the settings below Direction to configure what happens when the tripwire alarm is triggered:

> Configure Tripwire Response



Select OK to save the settings

IVSTripwireWebUINew7.png IVSTripwireWebUINew8.png

8. Select OK to save the Tripwire IVS alarm settings

IVSTripwireWebUINew9.png