PTZ/Instructions/RS485

Revision as of 23:41, 24 January 2020 by Marques.Phillips (talk | contribs) (Hardware Setup)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

RS485

Description

RS485 is a communication port. It can control the camera via back-end device when the information of RS485 is set in accordance with that of the back-end coding device.

Prerequisites

  • Dahua recorder with RS485 Port

Instructions

Common RS485 Settings

Device Channel PTZ Type: Protocol Address Baud Rate Data Bit Stop Bit Parity
Dahua SD59230IN-HC 1 Local Pelco-D 1 9600 8 1 None
Hikvision Analog PTZ 1 Local Pelco-D 1 2400 8 1 None

Hardware Setup

1. Connect the RS485 cable of the PTZ camera to the RS485 port on the Device. Ensure the match of A and B interfaces.

2. Connect the video out cable of the PTZ camera to the video input port on the Device.

3. Turn on the PTZ camera.

Determine PTZ's Address, Baud, & Protocol

Method 1: Reboot and View OSD

1. Connect Analog or HD-CVI PTZ to Channel 1.

2. Bring up Channel 1 Live View

3. Power cycle PTZ.

4. Wait for PTZ to boot, and watch Channel 1 for PTZ Info.

Method 2: Check Manufacturer's Manual or Specifications

Configure Dahua Recorder

Icon for type SystemUI Old.pngSystemUI Old

Prerequisites

  • Dahua recorder with RS485 port

Video Instructions

Step by Step Instructions

1. From Live View right click

Select Main Menu

RS485 - SystemUI Old - 1.jpg

2. Under Setting

Click Camera

RS485 - SystemUI Old - 2.jpg

3. Click System

RS485 - SystemUI Old - 3.jpg

4. Click PTZ

RS485 - SystemUI Old - 4.jpg

5. Use the dropdown box to select the Channel

RS485 - SystemUI Old - 5.jpg

6. Use the dropdown box to change PTZ Type to Local

RS485 - SystemUI Old - 6.jpg

7. Enter the desired settings for the RS485 communication

  • Protocol
  • Address
  • Baud Rate
  • Data Bit
  • Stop Bit
  • Parity

RS485 - SystemUI Old - 7.jpg

8. Click Apply then Save to save the settings

RS485 - SystemUI Old - 8.jpg

Icon for type SystemUI New.pngSystemUI New

Prerequisites

  • Dahua recorder with RS485 port

Video Instructions

Step by Step Instructions

1. From Live View right click

Select Main Menu

RS485 - SystemUI New - 1.jpg

2. Click Camera

RS485 - SystemUI New - 2.jpg

3. Click PTZ

RS485 - SystemUI New - 3.jpg

4. Use the dropdown box to select the Channel

RS485 - SystemUI New - 4.jpg

5. Use the dropdown box next to Control Mode to select Serial

RS485 - SystemUI New - 5.jpg

6. Enter the desired settings for the RS485 communication

  • Protocol
  • Address
  • Baud Rate
  • Data Bit
  • Stop Bit
  • Parity

RS485 - SystemUI New - 6.jpg

7. Click Apply to save the settings

RS485 - SystemUI New - 7.jpg

Icon for type WebUI Old.pngWebUI Old

Prerequisites

  • Dahua recorder with RS485 port
  • Network connection for recorder

Video Instructions

Step by Step Instructions

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

RS485 - WebUI Old - 1.jpg

2. Click Setup

RS485 - WebUI Old - 2.jpg

3. Click System > PTZ

RS485 - WebUI Old - 3.jpg

4. Use the dropdown box to select the Channel

RS485 - WebUI Old - 4.jpg

5. Use the dropdown box next to PTZ Type to select Local

RS485 - WebUI Old - 5.jpg

6. Enter the desired settings for the RS485 communication

  • Protocol
  • Address
  • Baud Rate
  • Data Bit
  • Stop Bit
  • Parity

RS485 - WebUI Old - 6.jpg

7. Click OK to save settings

RS485 - WebUI Old - 7.jpg

Icon for type WebUI New.pngWebUI New

Prerequisites

  • Dahua recorder with RS485 port
  • Network connection for recorder

Video Instructions

Step by Step Instructions

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

RS485 - WebUI New - 1.jpg

2. Click Management in the top left corner of the screen

Select Camera

RS485 - WebUI New - 2.jpg

3. Click PTZ

RS485 - WebUI New - 3.jpg

4. Use the dropdown box to select the Channel

RS485 - WebUI New - 4.jpg

5. Use the dropdown box next to PTZ Type to select Local

RS485 - WebUI New - 5.jpg

6. Enter the desired settings for the RS485 communication

  • Protocol
  • Address
  • Baud Rate
  • Data Bit
  • Stop Bit
  • Parity

RS485 - WebUI New - 6.jpg

7. Click OK to save settings

RS485 - WebUI New - 7.jpg

Icon for type SmartPSS.pngSmartPSS

Prerequisites

  • SmartPSS
  • Dahua recorder with RS485 port, added to SmartPSS

Video Instructions

Step by Step Instructions

1. From the Menu of SmartPSS

Click Device CFG

RS485 - SmartPSS - 1.jpg

2. Click to select the recorder from the Device Tree on the left side of the screen

RS485 - SmartPSS - 2.jpg

3. Click to expand the System section

RS485 - SmartPSS - 3.jpg

4. Click PTZ

RS485 - SmartPSS - 4.jpg

5. Use the dropdown to select the Channel

RS485 - SmartPSS - 5.jpg

6. Use the dropdown box next to PTZ Type to select Local

RS485 - SmartPSS - 6.jpg

7. Enter the desired settings for the RS485 communication

  • Protocol
  • Address
  • Baud Rate
  • Data Bit
  • Stop Bit
  • Parity

RS485 - SmartPSS - 7.jpg

8. Click Save to save settings

RS485 - SmartPSS - 8.jpg