NVR/Recording Setup/Multicast Setup

Revision as of 04:23, 4 March 2016 by Mark (talk | contribs) (→‎How to Setup Multicast)

How to Setup Multicast

You do not have permission to embed PDF files.

RTP Multicast

Step 1. type in commend to enable RTP multicast of RTP[0] and RTP[1]on Internet Explorer Address bar. http://ip/cgi-bin/configManager.cgi?action=setConfig&Multicast.RTP[0].Enable=true my IPC's IP address is 10.25.2.237, so this commend should be http://10.15.2.237/cgi-bin/configManager.cgi?action=setConfig&Multicast.RTP[0].Enable=true WEB page will let you enter login and password, then it will shows "OK"

You can also use this command and will show "Ok" as the same result.

http://10.15.2.237/cgi-bin/configManager.cgi?action=setConfig&Multicast.RTP[1].Enable=true,

You can see as followed RTP status after putting commend, both enabled are true Please note, for RTP multicast, both RTP [0] and [1] must enabled; The RTSP Port must be even

Retrieved from "https://DahuaWiki.com/index.php?title=NVR/Recording_Setup/Multicast_Setup&oldid=6569"