Difference between revisions of "Thermal/DHI-ASI7213X-T1/Instructions/Alarm Input and Output"

(→‎Door Release Button Physical Setup)
(→‎Door Strike Physical Setup)
Line 228: Line 228:
 
|-
 
|-
 
|rowspan="9"|CON3
 
|rowspan="9"|CON3
−
|-
 
−
|Black and red
 
−
|[[File:Wire_black_red_stripe.svg|35px]]
 
−
|RX
 
−
|RS-232 receiving port.
 
−
|-
 
−
|Black and orange
 
−
|[[File:Wire_black_orange_stripe.svg|35px]]
 
−
|TX
 
−
|RS-232 sending port.
 
−
|-
 
−
|Black and blue
 
−
|[[File:Wire_black_blue_stripe.svg|35px]]
 
−
|GND
 
−
|Connected to the common GND port.
 
−
|-
 
−
|Black and gray
 
−
|[[File:Wire_black_gray_stripe.svg|35px]]
 
−
|SR1
 
−
|Used for door contact detection.
 
−
|-
 
−
|Black and green
 
−
|[[File:Wire_black_green_stripe.svg|35px]]
 
−
|PUSH1
 
−
|Door open button of door No.1
 
 
|-
 
|-
 
|Black and brown
 
|Black and brown
Line 258: Line 233:
 
|DOOR1_COM
 
|DOOR1_COM
 
|Lock control common port.
 
|Lock control common port.
−
|-
 
−
|Black and yellow
 
−
|[[File:Wire_black_yellow_stripe.svg|35px]]
 
−
|DOOR1_NO
 
−
|Lock control normally open port.
 
 
|-
 
|-
 
|Black and purple
 
|Black and purple
Line 269: Line 239:
 
|Lock control normally closed port.
 
|Lock control normally closed port.
 
|}
 
|}
 +
 
==Door Release Button Physical Setup==
 
==Door Release Button Physical Setup==
 
{| class="wikitable"
 
{| class="wikitable"

Revision as of 15:41, 19 June 2020

Alarm Input and Output

Cable Connections
Physical Setup

Web Interface

  • Alarm Linkage

  • Alarm Linkage Log

  • Alarm Linkage-Modify

Cable Connections

  • Alarm1 = Normal
  • Alarm2 = High Temp
  • No alert for mask or face detection currently.

Contact 1

Port Cable Color Cable Name Description
CON1
CON1
Black Wire black.svg RD– Negative electrode of external card reader.
Red Wire red.svg RD+ Positive electrode of external card reader.
Blue Wire blue.svg CASE Tamper alarm input of the external card reader.
White Wire white.svg D1 Wiegand D1 input (connected to external card reader)/output (connected to controller).
Green Wire green.svg D0 Wiegand D0 input (connected to external card reader)/output (connected to controller).
Brown Wire brown.svg LED Connected to external reader indicator in
Yellow Wire yellow.svg B RS-485 negative electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module).
  • If the security module is enabled, you need to purchase access control security module separately. The security module needs separate power supply to provide power.
  • Once the security module is enabled, the exit button, lock control and firefighting linkage will be invalid.
Purple Wire purple.png A RS-485 positive electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module).
  • If the security module is enabled, you need to purchase access control security module separately. The security module needs separate power supply to provide power.
  • Once the security module is enabled, the exit button, lock control and firefighting linkage will be invalid

Contact 2

Port Cable Color Cable Name Description
CON2
CON2
White and red Wire white red stripe.svg ALARM1_NO Alarm 1 normally open output port
White and orange Wire white orange stripe.svg ALARM1_COM Alarm 1 common output port.
White and blue Wire white blue stripe.svg ALARM2_NO Alarm 2 normally open output port.
White and gray 35px ALARM2_COM Alarm 2 common output port.
White and green 35px GND Connected to the common GND port.
White Brown 35px ALARM1 Alarm 1 input port.
White and yellow 35px GND Connected to the common GND port.
White and purple Wire white purple stripe.png ALARM2 Alarm 2 input port.

Contact 3

Port Cable Color Cable Name Description
CON3
CON3
Black and red 35px RX RS-232 receiving port.
Black and orange 35px TX RS-232 sending port.
Black and blue Wire black blue stripe.svg GND Connected to the common GND port.
Black and gray Wire black gray stripe.svg SR1 Used for door contact detection.
Black and green Wire black green stripe.svg PUSH1 Door open button of door No.1
Black and brown 35px DOOR1_COM Lock control common port.
Black and yellow Wire black yellow stripe.svg DOOR1_NO Lock control normally open port.
Black and purple Wire black purple stripe.png DOOR1_NC Lock control normally closed port.

Normal Body Temperature Indication Light

Port Cable Color Cable Name Description
CON2
CON2
White and red Wire white red stripe.svg ALARM1_NO Alarm 1 normally open output port
White and orange Wire white orange stripe.svg ALARM1_COM Alarm 1 common output port.

High Body Temperature Indication Light

Port Cable Color Cable Name Description
CON2
CON2
White and blue Wire white blue stripe.svg ALARM2_NO Alarm 2 normally open output port.
White and gray 35px ALARM2_COM Alarm 2 common output port.

Door Strike Physical Setup

Port Cable Color Cable Name Description
CON3
CON3
Black and brown 35px DOOR1_COM Lock control common port.
Black and purple Wire black purple stripe.png DOOR1_NC Lock control normally closed port.

Door Release Button Physical Setup

Port Cable Color Cable Name Description
CON3
CON3
Black and blue Wire black blue stripe.svg GND Connected to the common GND port.
Black and green Wire black green stripe.svg PUSH1 Door open button of door No.1
Retrieved from "https://DahuaWiki.com/index.php?title=Thermal/DHI-ASI7213X-T1/Instructions/Alarm_Input_and_Output&oldid=64853"