Revision as of 21:37, 16 October 2020

Alarm Input and Output

Cable Connections

Physical Setup

Web Interface

• 

  Alarm Linkage

• 

  Alarm Linkage Log

• 

  Alarm Linkage-Modify

Cable Connections

• Alarm1 = High Temp
• Alarm2 = No Mask
• No alert for face detection currently.

Contact 1

CON1

Port	Cable Color		Cable Name	Description
CON1
	Black		RD–	Negative electrode of external card reader.
	Red		RD+	Positive electrode of external card reader.
	Blue		CASE	Tamper alarm input of the external card reader.
	White		D1	Wiegand D1 input (connected to external card reader)/output (connected to controller).
	Green	35px	D0	Wiegand D0 input (connected to external card reader)/output (connected to controller).
	Brown		LED	Connected to external reader indicator in
	Yellow		B	RS-485 negative electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module). If the security module is enabled, you need to purchase access control security module separately. The security module needs separate power supply to provide power. Once the security module is enabled, the exit button, lock control and firefighting linkage will be invalid.
	Purple		A	RS-485 positive electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module). If the security module is enabled, you need to purchase access control security module separately. The security module needs separate power supply to provide power. Once the security module is enabled, the exit button, lock control and firefighting linkage will be invalid

Contact 2

CON2

Port	Cable Color		Cable Name	Description
CON2
	White and red		ALARM1_NO	Alarm 1 normally open output port
	White and orange		ALARM1_COM	Alarm 1 common output port.
	White and blue		ALARM2_NO	Alarm 2 normally open output port.
	White and gray		ALARM2_COM	Alarm 2 common output port.
	White and green		GND	Connected to the common GND port.
	White Brown		ALARM1	Alarm 1 input port.
	White and yellow		GND	Connected to the common GND port.
	White and purple		ALARM2	Alarm 2 input port.

Contact 3

CON3

Port	Cable Color		Cable Name	Description
CON3
	Black and blue		GND	Connected to the common GND port.
	Black and gray		SR1	Used for door contact detection.
	Black and green		PUSH1	Door open button of door No.1
	Black and brown		DOOR1_COM	Lock control common port.
	Black and yellow		DOOR1_NO	Lock control normally open port.
	Black and purple		DOOR1_NC	Lock control normally closed port.

Alarm Outputs 1 and 2 - New Firmware

High Body Temperature Indication Light

CON2

Port	Cable Color		Cable Name	Description
CON2
	White and red		ALARM1_NO	Alarm 1 normally open output port
	White and orange		ALARM1_COM	Alarm 1 common output port.

Normal Body Temperature Indication Light

PLEASE NOTE: On firmware version 1.000.10BE001.0.R.200722 and later, you must change the Alarm Output 2 mode setting to "Normal Temperature Alarm" to be triggered when a normal temperature is detected

CON2

Port	Cable Color		Cable Name	Description
CON2
	White and blue		ALARM2_NO	Alarm 2 normally open output port.
	White and gray		ALARM2_COM	Alarm 2 common output port.

Alarm Outputs 1 and 2 - Old Firmware

High Body Temperature Indication Light

CON2

Port	Cable Color		Cable Name	Description
CON2
	White and blue		ALARM2_NO	Alarm 2 normally open output port.
	White and gray		ALARM2_COM	Alarm 2 common output port.

Normal Body Temperature Indication Light

CON2

Port	Cable Color		Cable Name	Description
CON2
	White and red		ALARM1_NO	Alarm 1 normally open output port
	White and orange		ALARM1_COM	Alarm 1 common output port.

Door Strike Physical Setup

CON3

Port	Cable Color		Cable Name	Description
CON3
	Black and brown		DOOR1_COM	Lock control common port.
	Black and purple		DOOR1_NC	Lock control normally closed port.

Door Release Button Physical Setup

CON3

Port	Cable Color		Cable Name	Description
CON3
	Black and blue		GND	Connected to the common GND port.
	Black and green		PUSH1	Door open button of door No.1

Card Reader:RS485

CON1

Port	Cable Color		Cable Name	Description
CON1
	Yellow		B	RS-485 negative electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module). If the security module is enabled, you need to purchase access control security module separately. The security module needs separate power supply to provide power. Once the security module is enabled, the exit button, lock control and firefighting linkage will be invalid.
	Purple		A	RS-485 positive electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module). If the security module is enabled, you need to purchase access control security module separately. The security module needs separate power supply to provide power. Once the security module is enabled, the exit button, lock control and firefighting linkage will be invalid

• 

  Door Config in DSS Express

Card Reader:Wiegand

CON1

Port	Cable Color		Cable Name	Description
CON1
	White		D1	Wiegand D1 input (connected to external card reader)/output (connected to controller).
	Green	35px	D0	Wiegand D0 input (connected to external card reader)/output (connected to controller).

WebUI Alarm Setup

SystemUI Set Temperature Threshold